モガミ電線株式会社

ホーム > 製品情報 > ギターケーブル

製品情報

Guitar Cables

各種ケーブル弾き比べ動画

日本に於いて売れている他社のケーブルとmogamiケーブルの音の違いが判ります。是非ご覧ください!

ギター編

ベース編

ギターケーブル


MOGAMI 2524 全国の楽器店等にて販売中!

世界標準のインストルメンタルケーブルです。ギターのみならず、ベース、キーボードにも最適な製品です。
アメリカやヨーロッパで大人気です。古くはCrosby,Stills&Nash、Fleetwood Mac、Peter Franmpton、またPrinceやSlashなどユーザーは列挙しきれないほど、多くのミュージシャンたちに支持されています。
MOGAMI 2524は 2021年から、上位グレードの 3368は 2022年末からNEUTRIK社のプラグ付完成品として各楽器店で販売中です。ギターマガジンやヤングギター等で紹介されており、当ホームページの新着情報で内容がご覧になれます。

GUITAR CABLES/HIGH IMPEDANCE TRANSMISSION CABLES

ギターコード/高インピーダンス伝送用ケーブル

Part No.2319 Part No.2524

Most musical instrument sound pick-ups such as those in electric guitars are comprised of high impedance circuits driven by voltage, in other words by very small electrical current flow. Therefore, so-called MICROPHONICS (noise) becomes a critical problem. (Microphonics means noise that is generated when the cable is moved and or tapped when the cabling circuit is a high impedance link.) Guitar cables must be counter-measured against this, so, a conductive PVC layer is placed under the shield conductor in most cases even though it may have a bad affect on audio sound quality. Therefore, the conductive PVC (black carbon PVC) layer must be removed together with the shielding conductor when wiring, otherwise we receive a strange claim that the cable is shorting.

エレキギターを始めとする楽器音のピックアップは電圧で駆動する、すなわち微小な電流で駆動する高インピーダンス回路で引き回される場合が殆どで、その場合マイクロホニックスという、ケーブルが動かされたりたたかれたりする時に発生するノイズが問題になります。ケーブルとしての音響的な音質の低下は免れませんが、そのマイクロホニックスの防止対策を施したケーブルがいわゆるギターケーブルと呼ばれるもので、通常はシールド導体の下に導電性ビニルの層が入っております。配線時にはこの黒いプラスチック部分をシールド導体と共に取り除いておきませんと、ケーブルがショートしているという妙な問い合わせを戴くことになります。

Low Capacitance Guitar Cable

低静電容量ギターケーブル


Part No.3368

3368 is a new cable designed for truly high performance sound while simultaneously being rugged enough for live stage and performance use. This large diameter cable is designed with lower capacitance for the purest possible sound, while not being so low to cause performance problems by being outside the design range of available instrument pickups.
Coaxial configuration gives the most accurate tone. A challenge for large diameter coaxial cables is that the center conductor must move inside the structure when the cable is flexed, so such cables can be delicate when handled roughly.
The proprietary composite braid shield structure of 3368 makes the cable quite rugged, and this new design maintains flexibility and performance even when used in a stage and touring environment.
A new method has been used to keep handling noise extremely low, so this cable can be used for any application where high impedance circuits (guitar pickups, sensor cables) with very low loss are needed.

外径はやや太いですが、最高の音質が得られるべく限りなく低静電容量を実現したギターケーブルです。シールドが編組構造なので横巻構造で時々発生してしまう中心導体のキンク現象問題が原理的に発生しません。また、ケーブルとして適度な弾性があるので型崩れしにくいですから、プロのステージ使用も可能です。更に今までなかった原理で低マイクロホニクス性が実現されていますので、ギターケーブル以外にも高インピーダンスセンサ用ケーブルなど、他の分野にも応用できる可能性があります。

SPECIFICATIONS 仕様

Configuration   構造
Part No. 品番 2319 2524
Conductor 導体 Details 構成 12/0.18A 50/0.12OFC
Size(mm2) サイズ 0.305mm2(#23AWG) 0.565mm2(#20AWG)
Insulation 絶縁体 Ov. Dia. (mm) 外径 1.6φ(0.063") 2.7φ(0.106")
Material 材質 PE
Color Clear
Sub-Shield 補助シールド Ov. Dia. (mm) 外径 1.8φ(0.071") 3.4φ(0.134")
Material 材質 Conductive PVC (Carbon PVC)
Color Black
Main-Shield 本シールド Served-Shield 横巻シールド Approx.48/0.12A Approx.57/0.18OFC
Jacket ジャケット Ov. Dia. (mm) 外径 5.0φ(0.197") 6.0φ(0.236 ")
Material 材質 PVC
Color Black
Roll Sizes 標準条長 100 m (328Ft) / 200m (656Ft)
Weight per 100 m ( 328 Ft ) roll 重量 3.5Kg 5.1Kg

ELECTRICAL & MECHANICAL CHARACTERISTICS 電気的・機械的特性

Part No. 品番 2319 2524
DC Resistance at 20℃ 導体抵抗 Inner Conductor 中心導体 0.06Ω/m(0.018Ω/Ft) 0.033Ω/m(0.010Ω/Ft)
Shield Conductor シ-ルド 0.032Ω/m(0.010Ω/Ft) 0.013Ω/m(0.0040Ω/Ft)
Capacitance at 1kHz, 20℃ 静電容量 155pF/m(47.3 pF/Ft) 130pF/m(39.7 pF/Ft)
Inductance インダクタンス 0.16μH/m(0.049μH/Ft) 0.2μH/m(0.061μH/Ft)
Electrostatic Noize* *ハムノイズ LOD (Limit of Detection)
Electromagnetic Noise At 10kHz電磁ノイズ LOD (Limit of Detection)
Microphonics* *マイクロホニックノイズ 1.0mV p-p 1.0mV p-p
Voltage Breakdown 耐電圧 Must withstand at DC 500V/15sec.
Insulation Resistance 絶縁抵抗 105MΩ・m Min. at DC 500V , 20℃
Flex Life* *耐屈曲特性 11,000 cycles 15,000 cycles
Tensile Strength (26℃,65%RH ) 抗張力 303 N 578 N
Emigration 移行性 Non-Emigrant to ABS resin ABS樹脂非移行
Applicable Temperature 使用温度 -20℃~ + 60℃ ( -4°F~+140°F )

*Using standard testing methods of Mogami Wire & Cable Corp. モガミ電線(株)社内検査基準の方法による。

CABLE SPECIFICATIONS ケーブルの仕様・構造

Configuration   構造
Part No. 品番 3368
Conductor 導体 Details 構成 50/0.12OFC
Size(mm2) サイズ 0.565mm2(#20AWG)
Semi-Conductive Layer 半導電層 Ov. Dia. (mm) 外径 1.5φ(0.059")
Material 材質 Conductive PE
Color Black
Insulation 絶縁体 Ov. Dia. (mm) 外径 5.3φ(0.209")
Material 材質 CPE
Color Natural
Sub-Shield 補助シールド Ov. Dia. (mm) 外径 5.7φ(0.224")
Material 材質 Conductive PVC (Carbon PVC)
Color Black
Shield シールド Type 方式 Composite Braid Shield 混成編組シールド
Details 構成 0.12OFC/7/12 + 167Dtec/2/12
Jacket ジャケット Ov. Dia. (mm) 外径 8.0φ(0.315")
Material 材質 PVC
Color Black
Roll Sizes 標準条長 100m(328Ft)/153m(500Ft)
Weight per 100 m ( 328 Ft ) roll 重量 6.2Kg

ELECTRICAL & MECHANICAL CHARACTERISTICS 電気的・機械的特性

Part No. 品番 3368
DC Resistance at 20℃ 導体抵抗 Inner Conductor 中心導体 0.033Ω/m(0.010/Ft)
Shield Conductor シ-ルド 0.024Ω/m(0.0073/Ft)
Capacitance at 1kHz, 20℃ 静電容量 70pF/m(21.4pF/Ft)
Inductance インダクタンス 0.4μH/m (0.12 μH/Ft)
Electrostatic Noize*ハムノイズ LOD (Limit of Detection)
Electromagnetic Noise At 10kHz*電磁ノイズ LOD (Limit of Detection)
Microphonics*マイクロホニックノイズ LOD (Limit of Detection)
Voltage Breakdown 耐電圧 Must withstand at DC 500V/15sec.
Insulation Resistance 絶縁抵抗 105MΩ・m Min. at DC 500V, 20℃
Flex Life*耐屈曲特性 15,000 cycles
Tensile Strength (26℃,65%RH ) 抗張力 540N
Emigration 移行性 Non-Emigrant to ABS resin ABS樹脂非移行
Applicable Temperature 使用温度 -20℃~+60℃ (-4°F~+140°F)

*Using standard testing methods of Mogami Wire & Cable Corp. モガミ電線(株)社内検査基準の方法による。